Cutback Bitumen & Bitumen Emulsion
Medium-curing cutbacks and cationic or anionic emulsions for prime coats, tack coats, chip seals, slurry seals and cold-mix work — applied without hot-mix plant.
Pick your grade
Cutbacks are diluted with a solvent that evaporates; emulsions are bitumen dispersed in water that breaks and sets. Both spray at far lower temperatures than hot binder.
Which one, when
- Prime coat on granular base
- MC30
- Prime coat and cold-mix / patch repair
- MC70 or MC250
- Chip seal and surface dressing
- CRS-2 or K1-60
- Tack coat, slurry seal, cold mix
- SS-60
Send the pavement design temperature, traffic loading and the standard your specification is written to. The trade desk will name the grade and attach the datasheet.
The family at a glance
Rows that differ between grades are highlighted.
| Property | MC30 | MC70 | MC250 | CRS-2 | SS-60 | K1-60 |
|---|---|---|---|---|---|---|
| Designation | ASTM D2027 | ASTM D2027 | ASTM D2027 | ASTM D2397 | ASTM D977 | BS 434 |
| Key property | Medium-curing cutback · lowest viscosity in the MC series | Medium-curing cutback · medium viscosity | Medium-curing cutback · higher viscosity band | Cationic rapid-setting emulsion | Anionic slow-setting emulsion | Cationic rapid-setting emulsion · BS 434 K1-60 |
| Primary application | Prime & tack coat | Prime & tack coat; Cold mix & patch repair | Prime & tack coat; Cold mix & patch repair | Surface dressing & chip seal | Prime & tack coat; Cold mix & patch repair | Surface dressing & chip seal |
| Datasheet | Open TDS → | Open TDS → | Open TDS → | Open TDS → | Open TDS → | Open TDS → |
Indicative designation data for selection. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Packed for the voyage
01
New steel drum
Palletized or loose. The export classic.
- 180 kg net
03
Flexitank · 20 ft container
Container-scale liquid delivery, port to plant.
- 20 MT / 20 ft
04
Bulk
Project-scale cargoes, tank-truck or vessel.
- Vessel or tanker
Liquid & Emulsion — common questions
Which liquid & emulsion grade should I specify?
Cutbacks are diluted with a solvent that evaporates; emulsions are bitumen dispersed in water that breaks and sets. Both spray at far lower temperatures than hot binder.
For prime coat on granular base, choose MC30. For prime coat and cold-mix / patch repair, choose MC70 or MC250. For chip seal and surface dressing, choose CRS-2 or K1-60. For tack coat, slurry seal, cold mix, choose SS-60.
How many liquid & emulsion grades do you supply?
We supply 6 grades in this family: MC30, MC70, MC250, CRS-2, SS-60, K1-60. Other designations can be supplied against a firm order and specification.
Can I get a sample before ordering?
Yes. Sample quantities with the corresponding certificate of analysis can be shipped for laboratory verification before a commercial order is placed. Ask the trade desk when you send your enquiry.
What documentation is issued?
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
What are the current payment terms?
Current commercial terms: under FOB, 30% advance payment and 70% against the agreed customs and shipping documents; under CFR, 30% advance payment and 70% after issuance of the Bill of Lading (B/L). Terms are agreed per contract.
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.