Oxidized Bitumen 90/15
A harder air-blown grade that serves both membrane and coating duty — high softening point for hot-roof service, still workable in membrane manufacture.
Oxidized bitumen 90/15 combines a high softening point of 85–95 °C with 10–20 dmm penetration. It serves two jobs: membrane manufacture for hot-climate roofs that would soften a lighter grade, and protective and industrial waterproofing coatings. HOMAN supplies 90/15 with a COA and SGS or Geochem inspection for every lot.
90/15 pairs a high softening point (about 90 °C) with mid-range penetration for membrane and protective coating duty in hot climates. Choose softer 75/25 for flexible torch-on work, or harder 90/10 for rigid pipe and steel protection.
- Designation
- Oxidized 90/15
- Key property
- Softening ≈ 90 °C / penetration ≈ 15 dmm
- Family
- Oxidized
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Specific Gravity at 25 °C | — | ASTM D70 | 1.01 - 1.06 |
| Penetration at 25 °C, 100g, 5s | 0.1 mm | ASTM D5 | 10 - 20 (5 / 25) |
| Softening Point | °C | ASTM D36 | 85 - 95 (75 / 95) |
| Loss on Heating | wt % | ASTM D6 | Max 0.2 |
| Flash Point (Cleveland Open Cup) | °C | ASTM D92 | Min 250 |
| Solubility in Trichloroethylene / CS2 | wt % | ASTM D2042 | Min 99.0 (CS2 Min 80%) |
| Ductility at 25 °C | cm | ASTM D113 | Min 3.0 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Request PDFOxidized 90/15 vs 75/25 bitumen (and 90/10)
90/15, 75/25 and 90/10 side by side, with the test method for each limit.
| Property | Test method | 90/15 | 75/25 | 90/10 |
|---|---|---|---|---|
| Penetration at 25 °C (0.1 mm) | ASTM D5 | 10 – 20 (5 / 25) | 20 – 30 (10 / 30) | 5 – 15 |
| Softening point (°C) | ASTM D36 | 85 – 95 (75 / 95) | 70 – 80 (65 / 85) | 85 – 95 |
| Ductility at 25 °C (cm) | ASTM D113 | Min 3.0 | Min 1.5 | Min 1.5 |
Limits as published on the HOMAN 90/15, 75/25 and 90/10 datasheets. The full oxidized ladder: 75/25 (flexible), 90/15 (dual duty), 90/10 (rigid).
Specified for
01
Membrane manufacture for hot climates
02
Protective coating compounds
03
Industrial waterproofing
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other oxidized grades
The two numbers in an oxidized designation are softening point and penetration. Higher first number means a harder, more heat-resistant product.
Oxidized 90/15 — common questions
What is blown bitumen 90/15?
An oxidized bitumen with a softening point around 90 °C and penetration around 15 dmm.
What is 90/15 used for?
Membrane manufacture for hot climates, protective coating compounds and industrial waterproofing.
How does 90/15 differ from 75/25?
It is harder (penetration 10–20 vs 20–30 dmm) with a higher softening point (85–95 vs 70–80 °C), so it holds up on hotter roofs but is less flexible.
How does 90/15 differ from 90/10?
Same softening band (85–95 °C), but 90/10 is harder (5–15 dmm) and meant for rigid pipe and steel protection; 90/15 keeps more ductility (min 3.0 cm vs 1.5 cm).
What is the softening point of oxidized bitumen 90/15?
85–95 °C (ASTM D36).
What is the flash point of 90/15?
Minimum 250 °C (Cleveland open cup, ASTM D92).
What is the HS code for blown bitumen?
HS 2713.20 (petroleum bitumen; national tariff suffixes vary); the code is confirmed on the invoice.
Where can I buy blown bitumen 90/15?
Request an FOB or CFR quotation from HOMAN with tonnage, packing and port.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.