HOMAN — Refined Supply GET A QUOTE
PavingIS 73

VG40 Bitumen (Viscosity Grade) to IS 73

Viscosity-graded binder to IS 73 / ASTM D3381 at the VG-40 band — the harder viscosity designation specified for heavy-duty and high-temperature corridors.

In short

VG40 bitumen is the hardest viscosity grade in the IS 73 paving bitumen standard, with an absolute viscosity of at least 3200 poise at 60 °C. It is specified for heavily trafficked and high-temperature pavements. HOMAN exports VG40 in 180 kg steel drums, jumbo bags, flexitanks and bulk, with a COA for every lot.

Grade choice

VG40 is the harder IS 73 viscosity band (≥ 3200 poise at 60 °C) for heavy-load and high-temperature corridors. It is not a drop-in for VG10 or VG30 — only quote it when the specification names VG-40.

Designation
VG40
Key property
Absolute viscosity ≥ 3200 poise @ 60 °C
Family
Paving
Documentation
COA per order lot
HOMAN 180 kg steel drum of Viscosity Grade Bitumen VG-40, batch-numbered for export
180 kg drum · also jumbo bag, flexitank & bulk
01 · PropertiesTest methods

Technical properties

Each row names the test method the value is measured by, so your inspection lab can reproduce it.

Technical properties of Viscosity Grade Bitumen VG-40 with test methods
PropertyUnitTest methodSpecification
Absolute viscosity at 60 °CPASTM D21713200–4800
Kinematic viscosity at 135 °CcStASTM D2170Min 400
Penetration at 25 °C, 100 g, 5 s0.1 mmASTM D5Min 35
Softening point (R&B)°CASTM D36Min 50
Flash point (Cleveland open cup)°CASTM D92Min 220
Solubility in trichloroethylene% m/mASTM D2042Min 99.0
Specific gravity at 27 °C—ASTM D70Min 0.99
Ductility at 25 °C (RTFOT residue)cmASTM D113Min 25

Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem

VG40 Bitumen (Viscosity Grade) to IS 73 — technical datasheet PDF, 91 KB — properties, test methods and packing. Download PDF (91 KB) Paving grade bitumen — safety data sheet (MSDS) PDF, 117 KB — UN GHS, 16 sections; covers all 10 paving grades. Download MSDS (117 KB)
HOMAN · export lot summary

VG-40 bitumen: export lot test results (excerpt)

Excerpt of an SGS pre-shipment inspection report table for VG-40 bitumen: penetration 44, softening point 53.4 °C, flash point 319 °C, absolute viscosity at 60 °C 4542 P
Excerpt shows absolute viscosity at 60 °C of 4542 P, penetration 44 (0.1 mm) and softening point 53.4 °C on an export lot.

Excerpt from an SGS pre-shipment inspection report; results reported by the producer's laboratory under SGS inspector observation. Full report shared with buyers on request.

02 · CompareVG10 · VG30 · VG40

VG30 vs VG40 bitumen (and VG10)

VG10, VG30 and VG40 side by side, with the test method for each limit.

Comparison of VG10, VG30 and VG40 specification limits
PropertyTest methodVG10VG30VG40
Absolute viscosity at 60 °C (P)ASTM D2171800 – 12002400 – 36003200 – 4800
Kinematic viscosity at 135 °C (cSt)ASTM D2170Min 250Min 350Min 400
Penetration at 25 °C (0.1 mm)ASTM D5Min 80Min 45Min 35
Softening point (°C)ASTM D36Min 40Min 47Min 50
Ductility at 25 °C (cm)ASTM D113Min 75Min 40Min 25 (after TFOT)
Flash point (°C)ASTM D92Min 220Min 220Min 220

Limits as published on the HOMAN VG10, VG30 and VG40 datasheets. VG30 suits most medium-to-heavy traffic roads; choose VG40 only where the project specification names VG-40.

VG10 datasheet → VG30 datasheet →

03 · ApplicationsWhere it goes

Specified for

01

National highway wearing course where VG-40 is specified

02

Heavy-load pavement

03

Hot-climate viscosity-grade asphalt

Highway & heavy traffic
05 · QualityDocumentation

Shipment quality documentation

Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

SGS or Geochem inspectionCOA per order lotBatch-numberedCertificate of origin (Chamber of Commerce)

How to check bitumen quality and a COA →

07 · QuestionsBuyer FAQ

VG40 — common questions

What is VG40 bitumen?

VG40 bitumen is the hardest viscosity grade in the IS 73 paving bitumen standard, with an absolute viscosity of at least 3200 poise at 60 °C. It is specified for heavily trafficked and high-temperature pavements. HOMAN exports VG40 in 180 kg steel drums, jumbo bags, flexitanks and bulk, with a COA for every lot.

What is VG40 bitumen used for?

VG40 is used in bituminous wearing and binder courses on national highways, expressways, heavy-load pavements such as truck lanes and port yards, and roads in hot climates where softer grades would rut. It should be used where the project specification names VG-40.

What is the difference between VG30 and VG40 bitumen?

VG40 is stiffer than VG30. Under IS 73, VG40 has an absolute viscosity of 3200–4800 poise at 60 °C against 2400–3600 poise for VG30, a higher softening point (min 50 °C vs min 47 °C) and lower penetration (min 35 vs min 45 on the HOMAN datasheets). VG30 suits most medium-to-heavy traffic; VG40 is for heavier loads and higher temperatures.

Which IS code covers VG40 bitumen?

VG40 is specified in IS 73, the Indian Standard for paving bitumen, which grades binders VG10, VG20, VG30 and VG40 by absolute viscosity at 60 °C. HOMAN supplies VG40 against IS 73 and documents results in the TDS and the Certificate of Analysis (COA) for the order lot.

What is the softening point of VG40 bitumen?

The minimum softening point of VG40 is 50 °C (ring and ball, ASTM D36), as stated on the HOMAN VG40 datasheet.

What is the density of VG40 bitumen?

Minimum 0.99 at 27 °C (ASTM D70) per the HOMAN VG40 datasheet; the lot value is reported on the COA.

What is the HSN / HS code of VG40 bitumen?

VG40 is declared under HS 2713.20 (petroleum bitumen; national tariff suffixes vary) on HOMAN commercial invoices and certificates of origin.

What is the price of VG40 bitumen per MT or per drum?

VG40 is quoted per metric ton and depends on tonnage, packaging, Incoterm and destination port. A 180 kg drum holds 0.18 MT, so one MT is about 5.6 drums. Send grade, tonnage, packaging, Incoterm and port for a current FOB or CFR quotation.

Which standard does VG40 conform to?

VG40 is supplied against IS 73 specification, with applicable test results documented in the HOMAN TDS and shipment quality documentation.

What documentation ships with VG40?

A Certificate of Analysis (COA) is provided for each order lot, supported by refinery laboratory test results and SGS or Geochem inspection documentation. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. SGS or Geochem provides independent shipment inspection documentation.

What packaging is available for VG40?

New steel drums of 180 kg, jumbo bags (300 kg, 1,000 kg or 1,300 kg), 20 MT flexitanks, or bulk by vessel and tank-truck. Drums can be palletized or shipped loose.

What is the minimum order quantity?

Minimum order depends on packaging and destination — a single 20 ft container of drums or jumbo bags is the usual floor, with flexitank and bulk quoted from one full container or vessel parcel upward. Send your tonnage and port and the trade desk will confirm.

What are the current payment terms?

Current commercial terms: under FOB, 30% advance payment and 70% against the agreed customs and shipping documents; under CFR, 30% advance payment and 70% after issuance of the Bill of Lading (B/L). Terms are agreed per contract.

Is HOMAN VG-40 bitumen tested before shipment?

Yes. Every lot is lab-tested in Bandar Abbas before shipment, and export lots receive pre-shipment inspection by SGS, or Geochem if the buyer chooses. On an export lot inspected by SGS, the producer's laboratory reported absolute viscosity at 60 °C of 4542 P, penetration 44 (0.1 mm) and softening point 53.4 °C under SGS inspector observation.

Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container

Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.

Specify the lot. Get a quotation.

Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.

Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

Request for quotationCOA per order lot

COA per order lot · Quotation on request.

Current commercial terms: under FOB, 30% advance payment and 70% against the agreed customs and shipping documents; under CFR, 30% advance payment and 70% after issuance of the Bill of Lading (B/L). EXW is also offered. Terms are agreed per contract.

Direct chartering or urgent vessel dispatch?

Direct Trade Desk
Price & Quotation Get a quote