Class 320 Bitumen (C320)
Class-graded binder to Australian standard AS 2008 at the C320 band — the harder class designation for asphalt and sealing work written to that standard.
Class 320 (C320) is the harder AS 2008 bitumen class, with a viscosity of 260–380 Pa·s at 60 °C and penetration of at least 40 dmm. It is the stiffer choice for asphalt and sprayed sealing written to that standard, on heavier traffic. HOMAN supplies C320 in drums, jumbo bags, flexitanks or bulk with a COA per lot.
C320 is the harder AS 2008 class (about 320 Pa·s at 60 °C) for asphalt and sprayed sealing written to that standard. It is not a substitute for C170 or C240 when those class numbers are named on the tender.
- Designation
- C320
- Key property
- Viscosity @ 60 °C ≈ 320 Pa·s (class designation)
- Family
- Paving
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Viscosity at 60 °C | Pa·s | AS/NZS 2341.2 | 260–380 |
| Viscosity at 135 °C | Pa·s | AS/NZS 2341.3 | 0.40–0.65 |
| Penetration at 25 °C, 100 g, 5 s | 0.1 mm | AS/NZS 2341.12 | Min 40 |
| Flash point | °C | AS/NZS 2341.14 | Min 250 |
| Matter insoluble in toluene | % m/m | AS/NZS 2341.8 | Max 1.0 |
| Viscosity at 60 °C — Tests on RTFO residue (AS/NZS 2341.10) | Pa·s | AS/NZS 2341.2 | Report |
| Penetration at 25 °C — Tests on RTFO residue (AS/NZS 2341.10) | 0.1 mm | AS/NZS 2341.12 | Report |
| Mass change — Tests on RTFO residue (AS/NZS 2341.10) | % | AS/NZS 2341.10 | Report |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (90 KB) Download MSDS (117 KB)C320 vs C240 bitumen (and 40/50)
C320, C240 and 40/50 side by side, with the test method for each limit.
| Property | Test method | C320 | C240 | 40/50 |
|---|---|---|---|---|
| Penetration at 25 °C (0.1 mm) | — | Min 40 · AS/NZS 2341.12 | Min 53 · AS/NZS 2341.12 | 40 – 50 · ASTM D5 |
| Flash point (°C) | — | Min 250 · AS/NZS 2341.14 | Min 250 · AS/NZS 2341.14 | Min 250 · ASTM D92 |
Limits as published on the HOMAN C320, C240 and 40/50 datasheets. 40/50 is shown as the penetration grade some buyers cross-reference; it is not an AS 2008 class.
Specified for
01
Higher-viscosity AS 2008 asphalt
02
Sprayed sealing where C320 is specified
03
Australian and NZ tender supply
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other paving grades
Choose by the designation your specification names — penetration band, viscosity grade or class number. All three describe the same material measured a different way.
C320 — common questions
What is C320 bitumen?
A Class 320 bitumen to AS 2008, the harder viscosity class with nominal viscosity around 320 Pa·s at 60 °C.
What is C320 bitumen used for?
Higher-viscosity asphalt to AS 2008 and sprayed sealing where C320 is specified.
What is the C320 bitumen specification?
Viscosity at 60 °C 260–380 Pa·s, at 135 °C 0.40–0.65 Pa·s, penetration min 40 dmm, flash point min 250 °C, RTFO residue viscosity, penetration and mass change reported.
Is C320 harder than C240?
Yes. C320 is about 260–380 Pa·s at 60 °C against 190–280 for C240, with lower penetration (min 40 vs min 53).
Is C320 equivalent to 40/50 penetration bitumen?
They are graded differently (viscosity class vs penetration band); treat any cross-reference as indicative and get engineer approval.
What is the density of C320 bitumen?
Specific gravity 1.01–1.06 at 25 °C (ASTM D70).
What is the HS code of C320?
HS 2713.20 (petroleum bitumen; national tariff suffixes vary).
How is C320 packed?
180 kg drums, jumbo bags (300 kg, 1,000 kg or 1,300 kg), 20 MT flexitanks or bulk.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.