PG 76-22 Polymer Modified Bitumen
Polymer-modified performance grade for the hardest duty we supply — hot climates combined with heavy, slow or channelised traffic where rutting resistance governs the design.
PG 76-22 is a polymer-modified performance-grade binder rated to a 76 °C maximum and −22 °C minimum pavement temperature under AASHTO M320. It is HOMAN's heaviest-duty binder, used on rutting-critical corridors with slow, heavy or channelised traffic such as truck lanes, intersections and port roads. It ships in drums, jumbo bags, flexitanks or bulk.
PG 76-22 is polymer-modified for hot climates with heavy, slow or channelised traffic where rutting resistance governs. Unmodified PG 76-10 shares the high-temperature number but not the polymer package; PG 70-16 is for milder temperate climates.
- Designation
- PG 76-22
- Key property
- High 76 °C / low −22 °C · polymer modified
- Family
- Performance
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Max pavement design temperature | °C | AASHTO M 320 | < 76 |
| Min pavement design temperature | °C | AASHTO M 320 | > −22 |
| Rotational viscosity at 135 °C — Original binder | Pa·s | AASHTO T 316 | Max 3 |
| DSR G*/sin δ at 76 °C, 10 rad/s — Original binder | kPa | AASHTO T 315 | Min 1.00 |
| DSR G*/sin δ at 76 °C, 10 rad/s — RTFO residue (AASHTO T 240) | kPa | AASHTO T 315 | Min 2.20 |
| BBR creep stiffness S at −12 °C, 60 s — PAV residue (AASHTO R 28, aging 100 °C) | MPa | AASHTO T 313 | Max 300 |
| BBR m-value at −12 °C, 60 s — PAV residue (AASHTO R 28, aging 100 °C) | — | AASHTO T 313 | Min 0.300 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (91 KB)PG 76-22 vs PG 76-10 bitumen (and PG 70-16)
PG 76-22, PG 76-10 and PG 70-16 side by side, with the test method for each limit.
| Property | Test method | PG 76-22 | PG 76-10 | PG 70-16 |
|---|---|---|---|---|
| Average 7-day max pavement design temp (°C) | AASHTO M 320 | < 76 | < 76 | < 70 |
| Min pavement design temp (°C) | AASHTO M 320 | > −22 | > −10 | > −16 |
| m-value at −12 °C (@60s) — after PAV | AASHTO T 313 | Min 0.300 | Min 0.300 | Min 0.300 |
Limits as published on the HOMAN PG 76-22, PG 76-10 and PG 70-16 datasheets. The three PG grades HOMAN supplies; only PG 76-22 is polymer modified.
Specified for
01
Rutting-critical highway corridors
02
Slow-moving and channelised traffic
03
Heavy axle-load pavement
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other performance grades
A PG designation states two temperatures: the high pavement temperature the binder resists permanent deformation at, and the low temperature it resists thermal cracking at.
PG 76-22 — common questions
What does PG 76-22 mean?
A performance grade for a 76 °C seven-day maximum pavement temperature and −22 °C minimum, under AASHTO M320.
Is PG 76-22 a PMB?
Yes. HOMAN supplies PG 76-22 as a polymer modified bitumen (PMB); the polymer adds elasticity and rutting resistance.
What is PG 76-22 used for?
Rutting-critical highway corridors, slow-moving and channelised traffic, and heavy axle-load pavement.
What is the difference between PG 76-22 and PG 64-22?
PG 64-22 is rated only to 64 °C at the high end; PG 76-22 is rated to 76 °C and polymer modified for heavy duty. HOMAN does not list PG 64-22.
What are the PG 76-22 test temperatures?
DSR at 76 °C (original and RTFO), and BBR creep stiffness and m-value at −12 °C after PAV.
What is the PG 76-22 price?
Quoted per metric ton by tonnage, packing, Incoterm and destination port.
How is PG 76-22 shipped?
180 kg steel drums, jumbo bags (300 kg, 1,000 kg or 1,300 kg), 20 MT flexitanks or bulk.
Does PG 76-22 need special handling?
Ask the trade desk for storage and heating guidance for modified binders; the datasheet does not specify it.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.