Anionic Slow Setting Bitumen Emulsion SS-60
Anionic slow-setting emulsion with a long working window — the choice for tack coats, slurry seals and cold-mix where the mix must stay workable.
SS-60 is an anionic slow-setting bitumen emulsion. Because it breaks slowly, it stays workable long enough for tack coats between asphalt layers, slurry seals and cold-mix production. It is not a chip-seal emulsion. HOMAN supplies SS-60 in 180 kg drums, flexitanks or bulk.
SS-60 is anionic and slow-setting, with a long working window for tack coats, slurry seals and cold-mix. It is not a rapid chip-seal emulsion — use CRS-2 or K1-60 when the job needs a fast break on the stone.
- Designation
- SS-60
- Key property
- Anionic slow-setting emulsion
- Family
- Liquid & Emulsion
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Viscosity, Saybolt Furol at 25 °C | SFS | ASTM D7496 | 20–100 |
| Storage stability, 24 h | % | ASTM D6930 | Max 1 |
| Cement mixing test | % | ASTM D6935 | Max 2.0 |
| Sieve test | % | ASTM D6933 | Max 0.10 |
| Ductility at 25 °C, 5 cm/min — Tests on distillation residue | cm | ASTM D113 | Min 40 |
| Solubility in trichloroethylene — Tests on distillation residue | % m/m | ASTM D2042 | Min 97.5 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (87 KB)Specified for
01
Tack coat between asphalt layers
02
Slurry seal
03
Cold-mix production
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other liquid & emulsion grades
Cutbacks are diluted with a solvent that evaporates; emulsions are bitumen dispersed in water that breaks and sets. Both spray at far lower temperatures than hot binder.
SS-60 — common questions
What is SS-60 bitumen emulsion?
An anionic (negatively charged) slow-setting emulsion.
What is SS-60 used for?
Tack coat between asphalt layers, slurry seal and cold-mix production.
Is SS-60 the same as SS-1?
Both are anionic slow-setting emulsions; SS-1 is the ASTM D977 designation. Confirm with the trade desk which designation your specification requires.
What is the difference between slow-setting and rapid-setting emulsion?
Slow-setting grades like SS-60 stay workable for mixing; rapid-setting grades like CRS-2 break quickly on chips for surface dressing.
What is the SS-60 price per drum?
HOMAN packs SS-60 in 180 kg net steel drums (not 200 L) and quotes per metric ton by tonnage, packing and port.
What is the HSN code for SS emulsion?
Bitumen emulsions are typically classified under HS 2715.00.
How is SS-60 shipped?
180 kg steel drums, 20 MT flexitanks or bulk.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.