Cutback Bitumen MC-30 (Medium Curing)
The thinnest medium-curing cutback in the ASTM D2027 ladder — low enough viscosity to penetrate a granular base properly as a prime coat.
MC-30 is the thinnest medium-curing cutback bitumen in ASTM D2027, with a kinematic viscosity of 30–60 cSt at 60 °C. That low viscosity lets it soak into a compacted granular base as a prime coat before surfacing, and it also works as a dust palliative. HOMAN ships MC-30 in steel drums, flexitanks or bulk.
MC-30 is the lowest-viscosity medium-curing cutback in the ASTM D2027 ladder — thin enough to penetrate a granular base as a prime coat. Step up to MC-70 or MC-250 when the tender names a heavier MC grade or cold-mix body is required.
- Designation
- MC30
- Key property
- Medium-curing cutback · lowest viscosity in the MC series
- Family
- Liquid & Emulsion
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Kinematic viscosity at 60 °C | mm²/s | ASTM D2170 | 30–60 |
| Flash point (Tag open cup) | °C | ASTM D3143 | Min 38 |
| Water | % vol | ASTM D95 | Max 0.2 |
| Distillate to 260 °C — Distillation (ASTM D402) · % vol of total distillate to 360 °C | % vol | ASTM D402 | 40–70 |
| Distillate to 316 °C — Distillation (ASTM D402) · % vol of total distillate to 360 °C | % vol | ASTM D402 | 75–93 |
| Residue to 360 °C, by difference | % vol | ASTM D402 | Min 50 |
| Ductility at 25 °C — Tests on distillation residue | cm | ASTM D113 | Min 100 |
| Solubility in trichloroethylene — Tests on distillation residue | % m/m | ASTM D2042 | Min 99.0 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (94 KB)MC-30 vs MC-70 cutback bitumen
MC-30 and MC-70 side by side, with the test method for each limit.
| Property | Test method | MC-30 | MC-70 |
|---|---|---|---|
| Kinematic viscosity at 60 °C (mm²/s) | ASTM D2170 | 30 – 60 | 70 – 140 |
| Flash point, Tag Open Cup (°C) | ASTM D3143 | Min 38 | Min 38 |
| Residue from distillation to 360 °C (% vol) | ASTM D402 | Min 50 | Min 55 |
| Distillation to 260 °C (% vol) | ASTM D402 | 40 – 70 | 20 – 60 |
Limits as published on the HOMAN MC-30 and MC-70 datasheets. MC-70 is the next step up when the tender needs more body.
Specified for
01
Prime coat on granular base
02
Dust palliative
03
Pre-treatment before surfacing
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other liquid & emulsion grades
Cutbacks are diluted with a solvent that evaporates; emulsions are bitumen dispersed in water that breaks and sets. Both spray at far lower temperatures than hot binder.
MC30 — common questions
What is MC-30 cutback bitumen?
A medium-curing cutback: paving bitumen thinned with a solvent so it can be sprayed at low temperature. MC-30 is the lowest-viscosity grade (30–60 cSt at 60 °C) in ASTM D2027.
What is MC-30 used for?
Prime coat on compacted granular base, dust palliative on unsealed surfaces, and pre-treatment before surfacing.
What is the difference between MC-30 and MC-70?
MC-70 is about twice as viscous (70–140 cSt vs 30–60) and leaves more residue (min 55 % vs min 50 %). MC-30 penetrates a base better; MC-70 has more body for cold-mix.
What does "medium curing" mean?
The solvent evaporates at a medium rate, slower than rapid-curing (RC) and faster than slow-curing (SC) cutbacks.
What is the flash point of MC-30?
Minimum 38 °C (Tag open cup, ASTM D3143). Store and handle it as a flammable liquid.
How much bitumen residue does MC-30 leave?
At least 50 % by volume after distillation to 360 °C (ASTM D402).
What is the HS code for MC-30 cutback?
Cutback bitumens are typically classified under HS 2715.00; the code is confirmed on the commercial invoice.
How is MC-30 packed for export?
180 kg new steel drums, 20 MT flexitanks or bulk; jumbo bags are not offered for cutbacks.
Is cutback bitumen better than emulsion for priming?
Cutback primes penetrate dense bases well but release solvent; emulsions are solvent-free. Choose per specification and local environmental rules.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.