HOMAN — Refined Supply GET A QUOTE
Liquid & EmulsionASTM D2027

Cutback Bitumen MC-70 (Medium Curing)

A step up in viscosity from MC-30 — still sprayable for prime coat work, with enough body to serve cold-mix and patch-repair production.

In short

MC-70 is a medium-curing cutback bitumen with a kinematic viscosity of 70–140 cSt at 60 °C and at least 55 % residue. It is thick enough to coat aggregate for cold-mix and pothole repair yet still sprayable as a prime coat, which makes it a common maintenance binder. HOMAN supplies MC-70 in drums, flexitanks or bulk.

Grade choice

MC-70 sits between MC-30 and MC-250: still sprayable for prime coat, with enough body for cold-mix and patch repair. Use MC-30 for the thinnest prime; MC-250 when the specification names the heavier viscosity band.

Designation
MC70
Key property
Medium-curing cutback · medium viscosity
Family
Liquid & Emulsion
Documentation
COA per order lot
HOMAN 180 kg steel drum of Cutback Bitumen MC-70 (Medium Curing), batch-numbered for export
180 kg drum · also jumbo bag, flexitank & bulk
01 · PropertiesTest methods

Technical properties

Each row names the test method the value is measured by, so your inspection lab can reproduce it.

Technical properties of Cutback Bitumen MC-70 (Medium Curing) with test methods
PropertyUnitTest methodSpecification
Kinematic viscosity at 60 °Cmm²/sASTM D217070–140
Flash point (Tag open cup)°CASTM D3143Min 38
Water% volASTM D95Max 0.2
Distillate to 260 °C — Distillation (ASTM D402) · % vol of total distillate to 360 °C% volASTM D40220–60
Distillate to 316 °C — Distillation (ASTM D402) · % vol of total distillate to 360 °C% volASTM D40265–90
Residue to 360 °C, by difference% volASTM D402Min 55
Ductility at 25 °C — Tests on distillation residuecmASTM D113Min 100
Solubility in trichloroethylene — Tests on distillation residue% m/mASTM D2042Min 99.0

Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem

Cutback Bitumen MC-70 (Medium Curing) — technical datasheet PDF, 93 KB — properties, test methods and packing. Download PDF (93 KB)
02 · CompareMC-70 · MC-30 · MC-250

MC-70 vs MC-30 cutback bitumen (and MC-250)

MC-70, MC-30 and MC-250 side by side, with the test method for each limit.

Comparison of MC-70, MC-30 and MC-250 specification limits
PropertyTest methodMC-70MC-30MC-250
Kinematic viscosity at 60 °C (mm²/s)ASTM D217070 – 14030 – 60250 – 500
Distillation to 316 °C (% vol)ASTM D40265 – 9075 – 9360–87 (600 °F)
Residue from distillation to 360 °C (% vol)ASTM D402Min 55Min 50Min 67 (680 °F)

Limits as published on the HOMAN MC-70, MC-30 and MC-250 datasheets. The full MC ladder from thinnest prime (MC-30) to heaviest body (MC-250).

MC-30 datasheet → MC-250 datasheet →

03 · ApplicationsWhere it goes

Specified for

01

Prime coat

02

Cold-mix production

03

Patch and pothole repair

Prime & tack coatCold mix & patch repair
05 · QualityDocumentation

Shipment quality documentation

Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

SGS or Geochem inspectionCOA per order lotBatch-numberedCertificate of origin (Chamber of Commerce)

How to check bitumen quality and a COA →

07 · QuestionsBuyer FAQ

MC70 — common questions

What is MC-70 cutback bitumen?

A medium-curing cutback to ASTM D2027 with 70–140 cSt kinematic viscosity at 60 °C — a step thicker than MC-30.

What does MC-70 mean?

MC = medium curing; 70 is the lower limit of its kinematic viscosity range at 60 °C in centistokes.

What is MC-70 used for?

Prime coat, cold-mix production, and patch and pothole repair.

Can MC-70 be used as a prime coat?

Yes. It is still sprayable for priming; on very dense or fine bases the thinner MC-30 penetrates further.

How is MC-70 different from MC-250?

MC-250 is much heavier (250–500 cSt) and is chosen when the tender names that band; MC-70 balances sprayability with cold-mix body.

What is the flash point of MC-70?

Minimum 38 °C (ASTM D3143, Tag open cup).

What is the HS code of MC-70?

Cutbacks are typically classified under HS 2715.00; HOMAN confirms the code on the invoice.

What is the MC-70 price per drum?

Prices are quoted per metric ton by tonnage, packing and port; a 180 kg drum is 0.18 MT. Request a quote with your volume and port.

How is MC-70 shipped?

In 180 kg steel drums, 20 MT flexitanks or bulk.

Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container

Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.

Specify the lot. Get a quotation.

Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.

Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

Request for quotationCOA per order lot

COA per order lot · Quotation on request.

Current commercial terms: under FOB, 30% advance payment and 70% against the agreed customs and shipping documents; under CFR, 30% advance payment and 70% after issuance of the Bill of Lading (B/L). EXW is also offered. Terms are agreed per contract.

Direct chartering or urgent vessel dispatch?

Direct Trade Desk
Price & Quotation Get a quote