Bitumen 80/100 — Penetration Grade
A softer core for colder climates — higher flexibility where pavements swing through low service temperatures and thermal cracking, not rutting, is the failure mode.
Bitumen 80/100 is a soft penetration grade, 80–100 dmm at 25 °C with a softening point of 42–52 °C. It keeps pavements flexible where low service temperatures cause thermal cracking, and suits cold-climate roads, thin overlays and resurfacing. HOMAN exports it in drums, jumbo bags, flexitanks and bulk.
Choose 80/100 when the pavement sees low service temperatures and thermal cracking, not rutting, is the failure mode. It is softer than 60/70 and is not interchangeable with 40/50, 60/70 or a viscosity grade such as VG10 unless the project specification allows it.
- Designation
- Pen 80/100
- Key property
- Penetration 80–100 dmm @ 25 °C
- Family
- Paving
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Specific Gravity at 25 °C | — | ASTM D70 | 1.01–1.05 |
| Penetration at 25 °C, 100g, 5s | 0.1 mm | ASTM D5 | 80–100 |
| Softening Point | °C | ASTM D36 | 42–52 |
| Ductility at 25 °C | cm | ASTM D113 | Min 100 |
| Loss on Heating | % m/m | ASTM D6 | Max 0.5 |
| Flash Point | °C | ASTM D92 | Min 225 |
| Solubility in Trichloroethylene | % m/m | ASTM D2042 | Min 99 |
| Spot Test | - | AASHTO T102 | Negative |
Limits per the HOMAN 80/100 technical datasheet. Penetration grade 80/100 (EN 12591 70/100 and ASTM D946 85–100 are close but different bands), tested to ASTM methods; each property is measured by the test method shown.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (87 KB) Download MSDS (117 KB)80/100 vs 60/70 bitumen (and VG10)
80/100, 60/70 and VG10 side by side, with the test method for each limit.
| Property | Test method | 80/100 | 60/70 | VG10 |
|---|---|---|---|---|
| Penetration at 25 °C (0.1 mm) | ASTM D5 | 80 – 100 | 60 – 70 | Min 80 |
| Softening point (°C) | ASTM D36 | 42 – 52 | Min 46 | Min 40 |
| Ductility at 25 °C (cm) | ASTM D113 | Min 100 | Min 100 | — |
| Flash point (°C) | ASTM D92 | Min 225 | Min 250 | Min 220 |
| Loss on heating (% m/m) | ASTM D6 | Max 0.5 | Max 0.2 | — |
Limits as published on the HOMAN 80/100, 60/70 and VG10 datasheets. VG10 is the nearest IS 73 viscosity-graded grade for buyers whose tender is written in VG terms. VG10 ductility is specified on RTFOT residue (IS 73) and is not comparable.
Specified for
01
Cold-climate paving
02
Thin overlays and resurfacing
03
Low service-temperature roads
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other paving grades
Choose by the designation your specification names — penetration band, viscosity grade or class number. All three describe the same material measured a different way.
Pen 80/100 — common questions
What does bitumen 80/100 mean?
"80/100" is the allowed penetration band: a soft paving bitumen whose needle penetration at 25 °C falls between 80 and 100 tenths of a millimetre, measured with a 100 g needle for 5 seconds (ASTM D5). The higher the numbers, the softer the bitumen; softer binders stay flexible at low temperature.
Where is bitumen 80/100 used?
Cold-climate paving, thin overlays and resurfacing, and roads with low service temperatures where cracking rather than rutting limits pavement life.
What is the difference between bitumen 60/70 and 80/100?
80/100 is softer and more flexible in cold weather; 60/70 is stiffer and resists rutting in warm climates. Do not use 80/100 as a hot-climate or heavy-axle substitute.
What is the softening point of 80/100 bitumen?
42–52 °C (ASTM D36), per the HOMAN 80/100 datasheet.
What is the specific gravity of 80/100 bitumen?
1.01–1.05 at 25 °C (ASTM D70) per the datasheet, reported per lot on the COA.
Is there a bitumen 80/100 specification PDF?
Yes. The HOMAN 80/100 technical data sheet is a downloadable PDF on this page, listing each property with its test method.
What is the price of bitumen 80/100 per ton?
Quoted per metric ton by tonnage, packing, Incoterm and port. The quotation form lists destination ports such as Mombasa (Kenya), Karachi Port (Pakistan) and Chattogram (Bangladesh); availability and routing are confirmed in the quotation.
What is the HS code for bitumen 80/100?
HS 2713.20 (petroleum bitumen; national tariff suffixes vary).
Is bitumen 80/100 the same as EN 70/100 or ASTM 85–100?
No. 80/100 is a penetration grade with an 80–100 dmm band at 25 °C. EN 12591 70/100 (70–100 dmm) and ASTM D946 85–100 (85–100 dmm) overlap with it but are different bands with their own limits, and HOMAN does not claim 80/100 conforms to either. If your tender names one of them, send the specification and the trade desk will confirm whether a lot can be tested and reported against it.
Is HOMAN Pen 80/100 bitumen tested before shipment?
Yes. Every lot is lab-tested in Bandar Abbas before shipment, and export lots receive pre-shipment inspection by SGS, or Geochem if the buyer chooses. On an export lot inspected by SGS, the producer's laboratory reported penetration 91 (0.1 mm), softening point 46.5 °C and flash point 314 °C under SGS inspector observation.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.