PG 76-10 Bitumen — Performance Grade
Performance grade specified for high pavement service temperature with a mild low-temperature requirement — the standard PG choice for hot, dry climates.
PG 76-10 is an AASHTO M320 performance-grade binder rated to a 76 °C maximum pavement temperature and −10 °C minimum. Mild winters and very hot summers make it the usual PG choice for desert and Gulf specifications, including highway wearing courses. HOMAN exports PG 76-10 in drums, jumbo bags, flexitanks or bulk.
PG 76-10 suits high pavement temperature with a mild low-temperature need (high 76 °C / low −10 °C) — the usual PG choice for hot, dry climates. For polymer-modified rutting duty specify PG 76-22; for temperate winters use PG 70-16.
- Designation
- PG 76-10
- Key property
- High 76 °C / low −10 °C
- Family
- Performance
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Max pavement design temperature | °C | AASHTO M 320 | < 76 |
| Min pavement design temperature | °C | AASHTO M 320 | > −10 |
| Rotational viscosity at 135 °C — Original binder | Pa·s | AASHTO T 316 | Max 3 |
| DSR G*/sin δ at 76 °C, 10 rad/s — Original binder | kPa | AASHTO T 315 | Min 1.00 |
| DSR G*/sin δ at 76 °C, 10 rad/s — RTFO residue (AASHTO T 240) | kPa | AASHTO T 315 | Min 2.20 |
| BBR creep stiffness S at 0 °C, 60 s — PAV residue (AASHTO R 28, aging 100 (110 desert) °C) | MPa | AASHTO T 313 | Max 300 |
| BBR m-value at 0 °C, 60 s — PAV residue (AASHTO R 28, aging 100 (110 desert) °C) | — | AASHTO T 313 | Min 0.300 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (92 KB)PG 76-10 vs PG 76-22 bitumen
PG 76-10 and PG 76-22 side by side, with the test method for each limit.
| Property | Test method | PG 76-10 | PG 76-22 |
|---|---|---|---|
| Min pavement design temp (°C) | AASHTO M 320 | > −10 | > −22 |
| Creep stiffness S at 0 °C (@60s) — after PAV (MPa) | AASHTO T 313 | Max 300 | Max 300 |
Limits as published on the HOMAN PG 76-10 and PG 76-22 datasheets. PG 76-22 shares the 76 °C high grade but adds polymer modification and a −22 °C low grade.
Specified for
01
Hot and desert climate paving
02
Highway wearing course
03
Gulf and Middle East specifications
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other performance grades
A PG designation states two temperatures: the high pavement temperature the binder resists permanent deformation at, and the low temperature it resists thermal cracking at.
PG 76-10 — common questions
What does PG 76-10 mean?
A performance grade rated for a 76 °C seven-day maximum pavement temperature and −10 °C minimum.
Where is PG 76-10 used?
Hot and desert-climate paving, highway wearing course, and Gulf and Middle East specifications.
Is PG 76-10 polymer modified?
The HOMAN PG 76-22 page describes PG 76-10 as unmodified: it shares the high-temperature grade with PG 76-22 but not the polymer package. If your specification requires modification, ask for the formulation.
PG 76-10 vs PG 76-22: what is the difference?
Both are rated to 76 °C; PG 76-22 is polymer modified and rated to −22 °C, for heavy, slow or channelised traffic. PG 76-10 is the standard hot, dry-climate grade.
At what temperature is PG 76-10 tested for cracking?
BBR creep stiffness and m-value at 0 °C after PAV ageing (AASHTO T313).
What is the DSR requirement for PG 76-10?
G*/sin δ min 1.00 kPa on original binder and min 2.20 kPa after RTFO at 76 °C.
How is PG 76-10 packed?
180 kg steel drums, jumbo bags (300 kg, 1,000 kg or 1,300 kg), 20 MT flexitanks or bulk.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.