Oxidized Bitumen 90/10
The most rigid oxidized grade we supply. Specified where the coating must resist deformation and moisture over decades — buried pipe, structural steel, industrial protection.
Oxidized bitumen 90/10 is the most rigid blown grade HOMAN supplies, with a softening point of 85–95 °C and penetration of only 5–15 dmm. It is specified where a coating must resist deformation and moisture for decades: buried pipe coating and wrapping, structural steel protection and rigid industrial coatings. It is not a membrane binder.
90/10 is the most rigid oxidized grade we supply — for buried pipe, structural steel and industrial coatings that must resist deformation for decades. It is not a substitute for 75/25 membrane binders or 90/15 mid-hardness coating grades.
- Designation
- Oxidized 90/10
- Key property
- Softening ≈ 90 °C / penetration ≈ 10 dmm
- Family
- Oxidized
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Specific Gravity at 25 °C | — | ASTM D70 | 1.01 - 1.06 |
| Penetration at 25 °C, 100g, 5s | 0.1 mm | ASTM D5 | 5 - 15 |
| Softening Point | °C | ASTM D36 | 85 - 95 |
| Loss on Heating | wt % | ASTM D6 | Max 0.2 |
| Flash Point (Cleveland Open Cup) | °C | ASTM D92 | Min 250 |
| Solubility in Trichloroethylene / CS2 | wt % | ASTM D2042 | Min 99.0 |
| Ductility at 25 °C | cm | ASTM D113 | Min 1.5 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Request PDFOxidized 90/10 vs 90/15 bitumen
90/10 and 90/15 side by side, with the test method for each limit.
| Property | Test method | 90/10 | 90/15 |
|---|---|---|---|
| Penetration at 25 °C (0.1 mm) | ASTM D5 | 5 – 15 | 10 – 20 (5 / 25) |
| Ductility at 25 °C (cm) | ASTM D113 | Min 1.5 | Min 3.0 |
Limits as published on the HOMAN 90/10 and 90/15 datasheets. 90/15 is the less rigid neighbour for membrane and coating duty.
Specified for
01
Pipe coating and wrapping
02
Structural steel protection
03
Rigid industrial coatings
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other oxidized grades
The two numbers in an oxidized designation are softening point and penetration. Higher first number means a harder, more heat-resistant product.
Oxidized 90/10 — common questions
What is oxidized bitumen 90/10?
The hardest air-blown grade in the HOMAN range: softening point about 90 °C and penetration about 10 dmm.
What is 90/10 used for?
Pipe coating and wrapping, structural steel protection and rigid industrial coatings.
Can 90/10 be used for roofing membranes?
Not as a substitute for 75/25 membrane binders; it is too rigid for flexible membranes.
What is the penetration of oxidized bitumen 90/10?
5–15 dmm at 25 °C (ASTM D5).
What is bituminous pipe coating?
A bitumen layer, often with a wrap, that protects buried steel pipe from moisture and corrosion; hard blown grades such as 90/10 are used because they resist flow.
What is the ductility of 90/10?
Minimum 1.5 cm at 25 °C (ASTM D113).
What is the HS code of oxidized bitumen 90/10?
HS 2713.20 (petroleum bitumen; national tariff suffixes vary).
How is 90/10 supplied?
In 180 kg steel drums, 25 kg cartons, 25–50 kg meltable polyamide bags or jumbo bags, with a COA and SGS or Geochem inspection per lot.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.