HOMAN — Refined Supply GET A QUOTE
Quality & inspection Technical article

How to check bitumen quality: COA, inspection report and lab tests

Check three things before you pay. The Certificate of Analysis (COA) must match your order lot and the batch number on the packaging. The pre-shipment inspection report must be confirmed with the company that issued it. And every result must meet the limits of the standard in your contract, such as IS 73:2013 or ASTM D946.

Key facts

  • IS 73:2013 (Clause 8.2) requires each container of viscosity-grade bitumen to be marked with the type and grade, the month and year of manufacture and the batch number.
  • IS 73:2013 (Clause 7.1) defines a lot as the containers of the same category and grade from the same batch of manufacture.
  • Solubility in trichloroethylene must be at least 99.0% under both IS 73:2013 (all four VG grades) and ASTM D946.
  • IS 73:2013 Table 2 sets how many containers to sample from a lot: 3 for up to 50 containers, 5 for 51–150, 7 for 151–500 and 10 for 501 or more.
  • Aging tests differ by standard: ASTM D946 uses the thin-film oven test (ASTM D1754) and a minimum retained penetration; IS 73:2013 tests the rolling thin-film oven residue for viscosity ratio (4.0 max) and ductility.
01 · COACertificate of Analysis

What should a bitumen COA show?

A COA reports the laboratory results for one lot. Read it against your contract, line by line:

  • The product and grade, exactly as named in the contract (for example VG30 to IS 73:2013, or 60/70 to ASTM D946).
  • The lot or batch number, matching the marking on the drums or bags you receive.
  • Each property with its test method, the result and the specification limit next to it.
  • The laboratory and the test date.

If a property your standard requires is missing, ask for it before shipment, not after arrival.

02 · InspectionSGS or Geochem

How do you verify a pre-shipment inspection report?

  • Confirm the report number and job details directly with the issuing inspection company (SGS or Geochem), through its official channels.
  • Check that the grade and lot on the inspection report match the COA and your contract.
  • Check that the container seal numbers on the loading report match the container doors and the bill of lading.
  • Ask for the samples to be drawn in the inspector's presence. IS 73:2013 (Clause 7) describes sampling containers at random from each lot.

The COA and the inspection report are different documents. The COA reports test results for the lot; the inspection report records what the independent inspector checked and witnessed. Buyers usually ask for both.

03 · Lab testsIS 73 · ASTM

Which lab tests show whether bitumen meets the standard?

Test Method What it tells you Limit (source)
Penetration at 25 °CASTM D5 · IS 1203Hardness; defines penetration gradesGrade range (ASTM D946); minimum per VG grade (IS 73:2013)
Absolute viscosity at 60 °CASTM D2171 · IS 1206 (Part 2)Stiffness at high pavement temperature; defines VG gradesVG30: 2,400–3,600 poise (IS 73:2013)
Softening point (ring and ball)ASTM D36 · IS 1205Temperature at which the binder softensMin 40 / 45 / 47 / 50 °C for VG10 / VG20 / VG30 / VG40 (IS 73:2013)
Flash point (Cleveland open cup)ASTM D92 · IS 1448 [P:69]Safe heating; a low value can point to light oilsMin 220 °C, all VG grades (IS 73:2013)
Solubility in trichloroethyleneASTM D2042 · IS 1216Purity; insoluble matterMin 99.0% (IS 73:2013 and ASTM D946)
Aging (thin-film oven)ASTM D1754 or D2872 · IS 73 RTFOTHow much the binder hardens in the mixing plant60/70: retained penetration min 52% (ASTM D946); viscosity ratio max 4.0 (IS 73:2013)

Sources: IS 73:2013 Table 1; ASTM D946 Table 1. Use the edition named in your contract. HOMAN datasheets list typical values per grade, for example VG30 and 60/70.

04 · Red flagsAdulteration

What is adulterated bitumen, and how do tests catch it?

Adulterated bitumen is product blended with cheaper material, such as light oils, oil residues or fillers, so that it passes one test but not the full specification. No single test proves adulteration. Signals to look for:

  • A flash point below the specification limit, which can point to light oils.
  • Solubility in trichloroethylene below 99.0%, which points to insoluble matter.
  • A failed aging result: retained penetration below the ASTM D946 minimum, or a viscosity ratio above 4.0 under IS 73:2013.
  • Results that do not match the COA when your own lab tests the delivered lot.

The surest protection is a complete test report to your standard, an independent pre-shipment inspection and a batch number on every package that ties it to the COA.

HOMANHow we supply

How HOMAN tests and documents each lot

HOMAN has been active since 2016, with trade desks in Tehran and Shenzhen, and exports to buyers in 11 countries. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

Test reports to the buyer's required standard, including ASTM and IS 73. We quote EXW, FOB or CFR, with a minimum order of one container.

05 · FAQBuyer questions

Frequently asked questions

Who issues the COA for a bitumen shipment?

The supplier issues the COA from the laboratory testing of the lot. A pre-shipment inspection company, such as SGS or Geochem, issues a separate inspection report. At HOMAN, every lot is lab-tested in Bandar Abbas and a COA is issued for each order lot.

Is an inspection report the same as a COA?

No. The COA reports the test results for the lot. The inspection report records what the independent inspector checked and witnessed. Buyers usually ask for both.

How many containers should be sampled from a bitumen lot?

IS 73:2013 Table 2 sets the number of containers to select at random: 3 for a lot of up to 50 containers, 5 for 51–150, 7 for 151–500 and 10 for 501 or more.

06 · SourcesStandards cited

Sources

  1. Bureau of Indian Standards, IS 73:2013 Paving Bitumen — Specification (Fourth Revision): Foreword, Clause 5 (Grades), Clause 7 (Sampling), Clause 8.2 (Marking), Table 1 (Requirements) and Table 2 (Scale of sampling).
  2. ASTM International, ASTM D946/D946M, Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction (current edition D946/D946M-25a), Table 1.
  3. ASTM test methods named in the text: D5 (penetration), D36 (softening point), D92 (flash point, Cleveland open cup), D2042 (solubility in trichloroethylene), D2170 and D2171 (kinematic and absolute viscosity), D1754 (thin-film oven test) and D2872 (rolling thin-film oven test).

Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.

Specify the lot. Get a quotation.

Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.

Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

Request for quotationCOA per order lot

COA per order lot · Quotation on request.

Current commercial terms: under FOB, 30% advance payment and 70% against the agreed customs and shipping documents; under CFR, 30% advance payment and 70% after issuance of the Bill of Lading (B/L). EXW is also offered. Terms are agreed per contract.

Direct chartering or urgent vessel dispatch?

Direct Trade Desk