Oxidized Bitumen 75/25
The softest oxidized grade in our range — enough flexibility to work as a torch-on membrane binder while holding shape well above ambient roof temperature.
Oxidized bitumen 75/25 is the softest air-blown grade HOMAN supplies, with a softening point of 70–80 °C and penetration of 20–30 dmm. That flexibility suits torch-on waterproofing membranes, roofing felt saturation and flexible waterproofing compounds, while still holding shape on a hot roof. It ships in 180 kg drums, 25 kg cartons, meltable polyamide bags or jumbo bags.
75/25 is the softest oxidized grade we supply — flexible enough for torch-on membrane and roofing felt, with softening around 75 °C. For hotter roofs or pipe coating, specify 90/15 or the harder 90/10 instead.
- Designation
- Oxidized 75/25
- Key property
- Softening ≈ 75 °C / penetration ≈ 25 dmm
- Family
- Oxidized
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Specific Gravity at 25 °C | — | ASTM D70 | 1.01 - 1.06 |
| Penetration at 25 °C, 100g, 5s | 0.1 mm | ASTM D5 | 20 - 30 (10 / 30) |
| Softening Point | °C | ASTM D36 | 70 - 80 (65 / 85) |
| Loss on Heating | wt % | ASTM D6 | Max 0.2 |
| Flash Point (Cleveland Open Cup) | °C | ASTM D92 | Min 250 |
| Solubility in Trichloroethylene / CS2 | wt % | ASTM D2042 | Min 99.0 (CS2 Min 80%) |
| Ductility at 25 °C | cm | ASTM D113 | Min 1.5 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Request PDFOxidized 75/25 vs 90/15 bitumen
75/25 and 90/15 side by side, with the test method for each limit.
| Property | Test method | 75/25 | 90/15 |
|---|---|---|---|
| Softening point (°C) | ASTM D36 | 70 – 80 (65 / 85) | 85 – 95 (75 / 95) |
| Penetration at 25 °C (0.1 mm) | ASTM D5 | 20 – 30 (10 / 30) | 10 – 20 (5 / 25) |
| Ductility at 25 °C (cm) | ASTM D113 | Min 1.5 | Min 3.0 |
Limits as published on the HOMAN 75/25 and 90/15 datasheets. 90/15 is the harder grade for hot roofs and coatings.
Specified for
01
Torch-on waterproofing membrane
02
Roofing felt saturation
03
Flexible waterproofing compounds
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other oxidized grades
The two numbers in an oxidized designation are softening point and penetration. Higher first number means a harder, more heat-resistant product.
Oxidized 75/25 — common questions
What is oxidized bitumen 75/25?
An air-blown (oxidized) bitumen whose softening point is about 75 °C and penetration about 25 dmm, the two numbers in its name.
What is oxidized bitumen 75/25 used for?
Torch-on waterproofing membranes, roofing felt saturation and flexible waterproofing compounds.
What is blown bitumen?
Bitumen hardened by blowing air through it at high temperature, raising its softening point for roofing, coatings and industrial use.
Which bitumen grade is best for waterproofing?
For flexible membranes and felts, the softer 75/25; for hot roofs or harder coatings, 90/15. Follow the membrane manufacturer's specification.
What is the softening point of oxidized bitumen 75/25?
70–80 °C (ASTM D36), per the HOMAN datasheet.
What is the specific gravity of 75/25?
1.01–1.06 at 25 °C (ASTM D70).
What is the HS code for oxidized bitumen?
Oxidized bitumen is classified under HS 2713.20 (petroleum bitumen; national tariff suffixes vary); the code is confirmed on the invoice.
How is oxidized bitumen 75/25 packed?
In 180 kg steel drums, 25 kg cartons, 25–50 kg meltable polyamide bags or jumbo bags; confirm the best format for your plant with the trade desk.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.