Cutback Bitumen MC-250 (Medium Curing)
Medium-curing cutback to ASTM D2027 at the MC-250 viscosity band — a heavier cutback than MC-70 for prime and cold-mix work that calls for that designation.
MC-250 is the heaviest medium-curing cutback HOMAN supplies, at 250–500 cSt at 60 °C with a flash point of at least 66 °C. It is used for cold-mix and patching materials and for prime work where the specification names the MC-250 band. It is not a substitute for MC-30 when deep base penetration is required.
MC-250 is the higher-viscosity medium-curing cutback for prime and cold-mix work that names that band. It is not a substitute for MC-30 when deep penetration of a granular base is the design intent.
- Designation
- MC250
- Key property
- Medium-curing cutback · higher viscosity band
- Family
- Liquid & Emulsion
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Kinematic viscosity at 60 °C | mm²/s | ASTM D2170 | 250–500 |
| Flash point (Tag open cup) | °C | ASTM D3143 | Min 66 |
| Water | % vol | ASTM D95 | Max 0.2 |
| Distillate to 260 °C — Distillation (ASTM D402) · % vol of total distillate to 360 °C | % vol | ASTM D402 | 15–55 |
| Distillate to 316 °C — Distillation (ASTM D402) · % vol of total distillate to 360 °C | % vol | ASTM D402 | 60–87 |
| Residue to 360 °C, by difference | % vol | ASTM D402 | Min 67 |
| Ductility at 25 °C — Tests on distillation residue | cm | ASTM D113 | Min 100 |
| Solubility in trichloroethylene — Tests on distillation residue | % m/m | ASTM D2042 | Min 99.0 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (94 KB)MC-250 vs MC-70 cutback bitumen
MC-250 and MC-70 side by side, with the test method for each limit.
| Property | Test method | MC-250 | MC-70 |
|---|---|---|---|
| Kinematic viscosity at 60 °C (mm²/s) | ASTM D2170 | 250 – 500 | 70 – 140 |
| Flash point, Tag Open Cup (°C) | ASTM D3143 | Min 66 | Min 38 |
Limits as published on the HOMAN MC-250 and MC-70 datasheets. MC-70 is the lighter neighbour.
Specified for
01
Prime coat where MC-250 is specified
02
Cold-mix and patch repair
03
Heavier medium-curing cutback applications
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other liquid & emulsion grades
Cutbacks are diluted with a solvent that evaporates; emulsions are bitumen dispersed in water that breaks and sets. Both spray at far lower temperatures than hot binder.
MC250 — common questions
What is MC-250 cutback bitumen?
A medium-curing cutback to ASTM D2027 with kinematic viscosity of 250–500 cSt at 60 °C.
What is MC-250 used for?
Cold-mix and patch repair, and prime coat where MC-250 is specified.
Why choose MC-250 instead of MC-70?
More binder body for coating aggregate; MC-70 (70–140 cSt) is easier to spray.
What is the flash point of MC-250?
Minimum 66 °C by Tag open cup (ASTM D3143), higher than MC-30 and MC-70 (min 38 °C).
What is the residue of MC-250?
Minimum 67 % by volume after distillation to 360 °C; residue ductility min 100 cm.
What is the water content limit of MC-250?
Maximum 0.2 % by volume (ASTM D95).
What is the HS code of MC-250?
Typically HS 2715.00 for cutback bitumen; confirmed on the invoice.
How is MC-250 supplied?
In 180 kg drums, 20 MT flexitanks or bulk.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.