Class 240 Bitumen (C240)
Class-graded binder to Australian standard AS 2008. The class number states nominal viscosity at 60 °C; C240 sits between C170 and C320 for asphalt and sprayed sealing.
Class 240 (C240) is the middle AS 2008 bitumen class, with a viscosity of 190–280 Pa·s at 60 °C and penetration of at least 53 dmm. It is quoted when a tender names Class 240 for asphalt or sprayed sealing that needs more stiffness than C170 but less than C320. HOMAN exports C240 in drums, jumbo bags, flexitanks or bulk.
C240 sits between C170 and C320 on the AS 2008 viscosity ladder (about 240 Pa·s at 60 °C). Quote it when the tender names Class 240; choose C170 for a softer class or C320 for the harder band.
- Designation
- C240
- Key property
- Viscosity @ 60 °C ≈ 240 Pa·s (class designation)
- Family
- Paving
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Viscosity at 60 °C | Pa·s | AS/NZS 2341.2 | 190–280 |
| Viscosity at 135 °C | Pa·s | AS/NZS 2341.3 | 0.32–0.55 |
| Penetration at 25 °C, 100 g, 5 s | 0.1 mm | AS/NZS 2341.12 | Min 53 |
| Flash point | °C | AS/NZS 2341.14 | Min 250 |
| Matter insoluble in toluene | % m/m | AS/NZS 2341.8 | Max 1.0 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (90 KB) Download MSDS (117 KB)C170 vs C240 bitumen (and C320)
C170, C240 and C320 side by side, with the test method for each limit.
| Property | Test method | C170 | C240 | C320 |
|---|---|---|---|---|
| Viscosity at 60 °C (Pa·s) | AS/NZS 2341.2 | 140 – 200 | 190 – 280 | 260 – 380 |
| Viscosity at 135 °C (Pa·s) | AS/NZS 2341.3 | 0.25–0.45 | 0.32–0.55 | 0.40–0.65 |
| Penetration at 25 °C (0.1 mm) | AS/NZS 2341.12 | Min 62 | Min 53 | Min 40 |
Limits as published on the HOMAN C170, C240 and C320 datasheets. The full AS 2008 class ladder HOMAN supplies.
Specified for
01
Sprayed sealing to AS 2008
02
Asphalt production where C240 is named
03
Australian and NZ tender supply
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other paving grades
Choose by the designation your specification names — penetration band, viscosity grade or class number. All three describe the same material measured a different way.
C240 — common questions
What is C240 bitumen?
A Class 240 paving bitumen to AS 2008, with nominal viscosity of about 240 Pa·s at 60 °C.
Where is C240 bitumen used?
Asphalt production where the tender names C240, and sprayed sealing to AS 2008 on Australian and NZ-style projects.
How does C240 compare with C170 and C320?
It sits between them: 190–280 Pa·s at 60 °C, against 140–200 for C170 and 260–380 for C320. Penetration is min 53 dmm (C170 min 62, C320 min 40).
What is the viscosity of C240 at 135 °C?
0.32–0.55 Pa·s (AS/NZS 2341.3), per the HOMAN C240 datasheet.
What is the flash point of C240 bitumen?
Minimum 250 °C (AS/NZS 2341.14).
What is the HS code for C240 bitumen?
HS 2713.20 (petroleum bitumen; national tariff suffixes vary).
Can I substitute C240 with C170 or C320?
Not without engineer approval; AS 2008 class numbers are not interchangeable on a tender.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.