Which bitumen grade for your climate? Penetration and viscosity grades compared
IS 73:2013 links VG10–VG40 to the 7-day average maximum air temperature; among penetration grades, 40/50 suits hotter roads and 80/100 cooler ones.
GET A QUOTE
Practical guides for bitumen buyers and road engineers: how to choose a grade, how the standards compare and how to check a lot before you pay. Each article is written by Sara Mohammadi, reviewed by Soroush Mohammadi, Managing Director, and cites the standards it relies on.
IS 73:2013 links VG10–VG40 to the 7-day average maximum air temperature; among penetration grades, 40/50 suits hotter roads and 80/100 cooler ones.
Only if the lot is tested and passes: 60/70 is graded by penetration at 25 °C, VG30 by viscosity at 60 °C (2,400–3,600 poise under IS 73:2013).
Match the COA to your order lot and the batch number on the packaging, confirm the inspection report with the company that issued it, and check every limit of your standard.
These guides are being written and reviewed. Until they are published, the trade desk answers these questions directly.
ASTM, EN, IS and AASHTO designations side by side. Equivalences are approximate: grades are only interchangeable when a lot is tested and passes the standard named in the contract.
| Standard & Grade | Approximate equivalent | Engineering note |
|---|---|---|
| ASTM D946: Pen 60/70 | EN 12591: 50/70 · IS 73: VG-30 (approximate) | Can rut on very hot, heavily trafficked roads; harder grades suit the hottest climates |
| IS 73: VG-30 | ASTM Pen 60/70 (only with an IS 73 test report) | Must also pass the rolling thin-film oven viscosity ratio (4.0 max, IS 73:2013 Table 1) |
| ASTM D946: Pen 80/100 | EN 12591: 70/100 · IS 73: VG-10 (approximate) | Bleeding/flushing during summer temperature spikes |
| AASHTO M320: PG 76-22 | Polymer Modified Asphalt (PMA) | Phase separation if storage tank unagitated |
| Oxidized bitumen 90/15 (industrial grade) | Industrial Oxidized Bitumen | Embrittlement and cracking under heavy UV exposure |
Usually a clean-on-board bill of lading, the commercial invoice and packing list, a Chamber of Commerce certificate of origin, a pre-shipment inspection report (SGS or Geochem, as the buyer chooses), a GHS safety data sheet and the COA for the order lot. Petroleum bitumen is classified under HS 2713.20 (national tariff suffixes vary). Confirm local rules with your customs broker.
Grade, tonnage, packaging, Incoterm and port — use the quotation form below. COA per order lot. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses.
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.