PG 70-16 Bitumen — Performance Grade
Performance grade balanced for temperate climates that still see genuine winters — moderate high-temperature stiffness with real low-temperature cracking resistance.
PG 70-16 is an AASHTO M320 performance-grade binder rated for pavements up to a 70 °C seven-day maximum and down to −16 °C. It balances moderate rutting resistance with real low-temperature cracking resistance, which suits temperate highways with true winters. HOMAN ships PG 70-16 in drums, jumbo bags, flexitanks or bulk.
PG 70-16 balances moderate high-temperature stiffness with real low-temperature cracking resistance (high 70 °C / low −16 °C). Prefer PG 76-10 or polymer-modified PG 76-22 when the climate or traffic is hotter and more rutting-critical.
- Designation
- PG 70-16
- Key property
- High 70 °C / low −16 °C
- Family
- Performance
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Max pavement design temperature | °C | AASHTO M 320 | < 70 |
| Min pavement design temperature | °C | AASHTO M 320 | > −16 |
| Rotational viscosity at 135 °C — Original binder | Pa·s | AASHTO T 316 | Max 3 |
| DSR G*/sin δ at 70 °C, 10 rad/s — Original binder | kPa | AASHTO T 315 | Min 1.00 |
| DSR G*/sin δ at 70 °C, 10 rad/s — RTFO residue (AASHTO T 240) | kPa | AASHTO T 315 | Min 2.20 |
| BBR creep stiffness S at −6 °C, 60 s — PAV residue (AASHTO R 28, aging 100 °C) | MPa | AASHTO T 313 | Max 300 |
| BBR m-value at −6 °C, 60 s — PAV residue (AASHTO R 28, aging 100 °C) | — | AASHTO T 313 | Min 0.300 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (91 KB)PG 70-16 vs PG 76-10 bitumen
PG 70-16 and PG 76-10 side by side, with the test method for each limit.
| Property | Test method | PG 70-16 | PG 76-10 |
|---|---|---|---|
| Average 7-day max pavement design temp (°C) | AASHTO M 320 | < 70 | < 76 |
| Min pavement design temp (°C) | AASHTO M 320 | > −16 | > −10 |
| Creep stiffness S at −6 °C (@60s) — after PAV (MPa) | AASHTO T 313 | Max 300 | Max 300 |
Limits as published on the HOMAN PG 70-16 and PG 76-10 datasheets. Compare with the hot-climate PG 76-10.
Specified for
01
Temperate climate highway paving
02
Four-season pavement
03
General PG-specified asphalt
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other performance grades
A PG designation states two temperatures: the high pavement temperature the binder resists permanent deformation at, and the low temperature it resists thermal cracking at.
PG 70-16 — common questions
What does PG 70-16 mean?
PG = performance grade. The binder is designed for a seven-day average maximum pavement temperature of 70 °C and a minimum pavement temperature of −16 °C.
Where is PG 70-16 used?
Temperate-climate highway paving, four-season pavements and general PG-specified asphalt.
PG 70-16 vs PG 76-10: which should I choose?
PG 76-10 handles hotter pavements (76 °C) but only −10 °C at the low end; PG 70-16 trades 6 °C of high-temperature capacity for better winter performance (−16 °C).
Which tests define PG 70-16?
DSR (AASHTO T315) on original, RTFO- and PAV-aged binder, BBR creep stiffness and m-value at −6 °C (AASHTO T313), and direct tension (T314).
What is the viscosity limit of PG 70-16 at 135 °C?
Maximum 3 Pa·s (AASHTO T316), so it can be pumped and mixed.
Is PG 70-16 polymer modified?
The datasheet does not state modification; ask the trade desk for the formulation of your lot.
How is PG 70-16 shipped?
180 kg steel drums, jumbo bags (300 kg, 1,000 kg or 1,300 kg), 20 MT flexitanks or bulk.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.