Cationic Rapid Setting Bitumen Emulsion K1-60 (BS 434)
Cationic rapid-setting emulsion graded to BS 434 as K1-60 — used for surface dressing and sprayed seal work written to that British standard designation.
K1-60 is a cationic rapid-setting bitumen emulsion graded to British Standard BS 434, with at least 57 % binder residue. It is specified for surface dressing and sprayed seals on tenders written to British designations, which are still common in many former BS markets. HOMAN supplies K1-60 in steel drums, flexitanks or bulk.
K1-60 is the BS 434 cationic rapid-setting grade for surface dressing and sprayed seal written to that British designation. ASTM projects that name CRS-2 should use the CRS-2 datasheet; slow-setting tack or slurry work belongs on SS-60.
- Designation
- K1-60
- Key property
- Cationic rapid-setting emulsion · BS 434 K1-60
- Family
- Liquid & Emulsion
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Particle charge | — | BS 434-1 | Positive |
| Residue on 710 µm sieve | % m/m | BS 434-1 | Max 0.05 |
| Residue on 150 µm sieve | g/100 mL | BS 434-1 | Max 0.15 |
| Binder content | % m/m | BS 434-1 | Min 57 |
| Viscosity at 20 °C (Engler) | °E | BS 434-1 | 6–9 |
| Storage stability, long period (water content difference) | % | BS 434-1 | Max 2 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (86 KB)Specified for
01
Surface dressing to BS 434
02
Chip seal / sprayed seal where K1-60 is named
03
Cationic rapid-setting emulsion work
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other liquid & emulsion grades
Cutbacks are diluted with a solvent that evaporates; emulsions are bitumen dispersed in water that breaks and sets. Both spray at far lower temperatures than hot binder.
K1-60 — common questions
What is K1-60 bitumen emulsion?
A cationic rapid-setting emulsion designated K1-60 under BS 434: "K" = cationic, "1" = rapid setting, "60" = nominal binder content.
Where is K1-60 used?
Surface dressing to BS 434, chip/sprayed seal where K1-60 is named, and other cationic rapid-setting work.
Is K1-60 the same as CRS-2?
They do the same job under different standards. HOMAN K1-60 has binder content min 57 % (BS 434-1); CRS-2 residue min 65 % (ASTM D6997). Use the grade the tender names.
What is the binder content of K1-60?
Minimum 57 % m/m (BS 434-1), per the HOMAN K1-60 datasheet.
Which tenders specify K1-60?
Road specifications written to British designations; check your tender wording before ordering.
What is the storage stability of K1-60?
Maximum 2 % (long-period storage stability, water content difference, BS 434-1).
What is the HS code of K1-60?
Typically HS 2715.00 for bitumen emulsions.
How is K1-60 delivered?
In 180 kg steel drums, 20 MT flexitanks or bulk.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.