Cationic Rapid Setting Bitumen Emulsion CRS-2
Cationic rapid-setting emulsion for chip sealing and surface dressing — breaks quickly on the aggregate so the seal can be trafficked sooner.
CRS-2 is a cationic rapid-setting bitumen emulsion to ASTM D2397, with at least 65 % bitumen residue and a viscosity of 100–400 SFS at 50 °C. Its positive charge makes it break fast on most aggregates, so chip seals and surface dressings can carry traffic sooner. HOMAN ships CRS-2 in steel drums, flexitanks or bulk.
CRS-2 is a cationic rapid-setting emulsion for chip seal and surface dressing that must break quickly on the aggregate. For British-standard dressing specify K1-60; for tack coat or slurry with a long working window use anionic SS-60.
- Designation
- CRS-2
- Key property
- Cationic rapid-setting emulsion
- Family
- Liquid & Emulsion
- Documentation
- COA per order lot
Technical properties
Each row names the test method the value is measured by, so your inspection lab can reproduce it.
| Property | Unit | Test method | Specification |
|---|---|---|---|
| Viscosity, Saybolt Furol at 50 °C | SFS | ASTM D7496 | 100–400 |
| Storage stability, 24 h | % | ASTM D6930 | Max 1 |
| Demulsibility, 35 mL 0.8 % DSS | % | ASTM D6936 | Min 40 |
| Particle charge | — | ASTM D7402 | Positive |
| Sieve test | % | ASTM D6933 | Max 0.10 |
| Residue | % | ASTM D6997 | Min 65 |
| Ductility at 25 °C, 5 cm/min — Tests on distillation residue | cm | ASTM D113 | Min 40 |
| Solubility in trichloroethylene — Tests on distillation residue | % m/m | ASTM D2042 | Min 97.5 |
Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem
Download PDF (89 KB)Specified for
01
Chip seal and surface dressing
02
Sprayed seal work
03
Rapid-return-to-traffic sealing
Packed for the voyage
Batch-numbered for traceability.
Shipment quality documentation
Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.
Other liquid & emulsion grades
Cutbacks are diluted with a solvent that evaporates; emulsions are bitumen dispersed in water that breaks and sets. Both spray at far lower temperatures than hot binder.
CRS-2 — common questions
What is CRS-2 emulsion?
A cationic (positively charged) rapid-setting bitumen emulsion graded to ASTM D2397, used mainly for chip sealing.
What is CRS-2 used for?
Chip seal and surface dressing, sprayed seal work, and sealing jobs that must reopen to traffic quickly.
What is the difference between CRS-1 and CRS-2?
CRS-2 is the higher-viscosity, higher-residue grade (HOMAN CRS-2: 100–400 SFS at 50 °C, residue min 65 %), so it holds larger chips without running off; CRS-1 is thinner. HOMAN currently lists CRS-2.
What is the residue content of CRS-2?
Minimum 65 % by weight after distillation (ASTM D6997).
How is CRS-2 different from K1-60?
Both are cationic rapid-setting; CRS-2 is specified on ASTM projects, K1-60 on British-standard (BS 434) surface dressing tenders.
What is the storage stability of CRS-2?
Maximum 1 % in 24 hours (ASTM D6930).
What is the HS code for bitumen emulsion?
Bitumen emulsions are typically classified under HS 2715.00; confirmed on the invoice.
How is CRS-2 packed?
180 kg steel drums, 20 MT flexitanks or bulk.
Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container
Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.
Specify the lot. Get a quotation.
Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.
Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.