HOMAN — Refined Supply GET A QUOTE
PavingAS 2008

Class 170 Bitumen (C170)

Class-graded binder to the Australian standard AS 2008, where the class number states nominal viscosity at 60 °C. Used for both asphalt and sprayed sealing work.

In short

Class 170 (C170) is the softest AS 2008 bitumen class HOMAN supplies, with a viscosity of 140–200 Pa·s at 60 °C and penetration of at least 62 dmm. It is the usual binder for sprayed sealing and general asphalt on Australian and New Zealand-style specifications, and is exported in drums, jumbo bags, flexitanks or bulk.

Grade choice

C170 is the softer AS 2008 class (nominal viscosity about 170 Pa·s at 60 °C). Use it when the Australian or NZ tender names Class 170. C240 and C320 are harder classes in the same ladder — do not swap class numbers without engineer approval.

Designation
C170
Key property
Viscosity @ 60 °C ≈ 170 Pa·s (class designation)
Family
Paving
Documentation
COA per order lot
HOMAN 180 kg steel drum of Class 170 Bitumen (C170), batch-numbered for export
180 kg drum · also jumbo bag, flexitank & bulk
01 · PropertiesTest methods

Technical properties

Each row names the test method the value is measured by, so your inspection lab can reproduce it.

Technical properties of Class 170 Bitumen (C170) with test methods
PropertyUnitTest methodSpecification
Viscosity at 60 °CPa·sAS/NZS 2341.2140–200
Viscosity at 135 °CPa·sAS/NZS 2341.30.25–0.45
Penetration at 25 °C, 100 g, 5 s0.1 mmAS/NZS 2341.12Min 62
Flash point°CAS/NZS 2341.14Min 250
Matter insoluble in toluene% m/mAS/NZS 2341.8Max 1.0
Density at 15 °Ckg/m³AS/NZS 2341.7Report

Specification limits per the HOMAN technical datasheet. Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

Datasheet issued by the HOMAN technical team · Lot testing: Bandar Abbas laboratory · Inspection: SGS or Geochem

Class 170 Bitumen (C170) — technical datasheet PDF, 90 KB — properties, test methods and packing. Download PDF (90 KB) Paving grade bitumen — safety data sheet (MSDS) PDF, 117 KB — UN GHS, 16 sections; covers all 10 paving grades. Download MSDS (117 KB)
02 · CompareC170 · C240 · 80/100

C170 vs C240 bitumen (and 80/100)

C170, C240 and 80/100 side by side, with the test method for each limit.

Comparison of C170, C240 and 80/100 specification limits
PropertyTest methodC170C24080/100
Penetration at 25 °C (0.1 mm)—Min 62 · AS/NZS 2341.12Min 53 · AS/NZS 2341.1280 – 100 · ASTM D5

Limits as published on the HOMAN C170, C240 and 80/100 datasheets. 80/100 is listed only as the penetration-graded reference some buyers ask about; it is not an AS 2008 class.

C240 datasheet → 80/100 datasheet →

03 · ApplicationsWhere it goes

Specified for

01

Sprayed sealing

02

Asphalt production to AS specification

03

Australian and NZ tender supply

Highway & heavy trafficSurface dressing & chip seal
05 · QualityDocumentation

Shipment quality documentation

Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

SGS or Geochem inspectionCOA per order lotBatch-numberedCertificate of origin (Chamber of Commerce)

How to check bitumen quality and a COA →

07 · QuestionsBuyer FAQ

C170 — common questions

What is C170 bitumen?

A Class 170 paving bitumen to Australian Standard AS 2008, where the class number is the nominal viscosity at 60 °C in Pa·s.

What is C170 bitumen used for?

Sprayed sealing (chip seal) and asphalt production to AS specifications, mainly for Australian, New Zealand and Pacific tenders.

What is the C170 bitumen specification?

Viscosity at 60 °C 140–200 Pa·s, viscosity at 135 °C 0.25–0.45 Pa·s, penetration min 62 dmm, flash point min 250 °C and matter insoluble in toluene max 1.0 %.

What is the difference between C170 and C320?

C320 is roughly twice as viscous at 60 °C (260–380 Pa·s vs 140–200) and harder (penetration min 40 vs min 62). C170 suits sprayed seals; C320 heavier-duty asphalt.

What is the density of C170 bitumen?

Specific gravity 1.01–1.06 at 25 °C (ASTM D70) per the HOMAN C170 datasheet.

Can C170 replace 80/100 penetration bitumen?

Only with engineer approval: they are graded by different systems (viscosity class vs penetration band).

What is the HS code for Class 170 bitumen?

HS 2713.20 (petroleum bitumen; national tariff suffixes vary).

How is C170 shipped?

180 kg new steel drums, jumbo bags (300 kg, 1,000 kg or 1,300 kg), 20 MT flexitanks or bulk, with a COA and SGS or Geochem inspection per lot.

Active since 2016 · Exports to 11 countries · Offices in Tehran and Shenzhen · Minimum order: one container

Bulk · Drums · Jumbo bags · FlexitanksTrade desk quotation.

Specify the lot. Get a quotation.

Grade, tonnage, packaging, Incoterm and port — send those five lines and the trade desk issues a quotation.

Trade desk quotation on request.Every lot is lab-tested in Bandar Abbas before shipment. Pre-shipment inspection is carried out by SGS or Geochem, as the buyer chooses. A Certificate of Analysis (COA) is issued for each order lot and tied to the batch number on the packaging.

Request for quotationCOA per order lot

COA per order lot · Quotation on request.

Current commercial terms: under FOB, 30% advance payment and 70% against the agreed customs and shipping documents; under CFR, 30% advance payment and 70% after issuance of the Bill of Lading (B/L). EXW is also offered. Terms are agreed per contract.

Direct chartering or urgent vessel dispatch?

Direct Trade Desk
Price & Quotation Get a quote